Resistance Temperature Detector (RTD)
Navigate to Online → Special Module Setup → RTD Module or click on the RTD module within the Card Properties.
Applied Modules
- IO-SA0400
RTD Module
Step 1: Hold CTRL to configure all channels at once.
Step 2: Click Setup to configure the RTD type, digital value range, digital filter constant, or average time.
- RTD Type:
- Platinum 100 (PT100)
- Japenese Platinum 100 (JPT100)
- Platinum 1,000 (PT1000)
- Nickel 1,000 (DIN43760)
- Nickel 1,000 (TER5000)
- Disable
- Digital Value Range:
- -192 ~ 16,191
- -8,192 ~ 8,191
- 0 ~ 16,000
- -8,000 ~ 8,000
- Digital Filter Constant:
- Percentage value
- Average Time:
- Second Value
Step 3: Once the settings are configured, click OK to confirm and apply the changes.
Step 4: To save the configured parameters to the PLC, click Write.
Step 5: Click Read to check the parameters.
Step 6: For real-time monitoring and module diagnostics, click Status. This displays the current value, minimum and maximum values, firmware version of the module, and any error codes.