IO-SD0032PPWM RAMP Control
- The output control of the IO-SD0032PPWM is available from 1 ~ 4,000pps.
- RAMP is supported when the frequency value is changed.
- Please refer to the RAMP instruction.
- The frequency RAMP feature changes according to the frequency RAMP control time.
- If the set time is 0, the frequency RAMP changes immediately.
- The setting value for frequency can be changed during the RAMP operation.
- However, changing the frequency RAMP control time can only be applied AFTER changing the frequency value.
- The IO-SD0032PPWM’s output DUTY cycle ratio can be controlled from 0% ~ 100%.
- Please refer to the DUTY instruction.
- There is support for the RAMP when DUTY cycle ratio changes feature.
- The DUTY cycle RAMP function changes according to the frequency RAMP control time.
- It instantly changes if the DUTY cycle RAMP time is set to 0.
- If the DUTY RAMP control time is changed during the RAMP operation, the change will be applied in the NEXT operation.
- There are a maximum of 12 channels available for high-speed pulse-width modulation output that supports the RAMP feature.
- Frequency RAMP and DUTY cycle RAMP operate individually.