IO-SA0004C and IO-SA0004V Internal I/O Table
| Input | Name of Signal | Output | Name of Signal |
|---|---|---|---|
| Xn.0 | DA Module Ready | Yn.0 | Reserved |
| Xn.1 | Reserved | Yn.1 | Reserved |
| Xn.2 | Flag indicating the operation condition set up | Yn.2 | Requesting to set up an operation condition |
| Xn.3 | Channel 1 Output Enable (Status) | Yn.3 | Channel 1 Output Enable (Control Command) |
| Xn.4 | Channel 2 Output Enable (Status) | Yn.4 | Channel 2 Output Enable (Control Command) |
| Xn.5 | Channel 3 Output Enable (Status) | Yn.5 | Channel 3 Output Enable (Control Command) |
| Xn.6 | Channel 4 Output Enable (Status) | Yn.6 | Channel 4 Output Enable (Control Command) |
| Xn.7 | Reserved | Yn.7 | Reserved |
| Xn.8 | Reserved | Yn.8 | Reserved |
| Xn.9 | Reserved | Yn.9 | Reserved |
| Xn.A | Reserved | Yn.A | Reserved |
| Xn.B | Reserved | Yn.B | Reserved |
| Xn.C | Reserved | Yn.C | Reserved |
| Xn.D | Reserved | Yn.D | Reserved |
| Xn.E | Reserved | Yn.E | Reserved |
| Xn.F | DA Module Error Flag | Yn.F | Requesting to Clear Error Flag |
Xn.2 and Yn.2: These flags are used to save an operating condition in the buffer memory into the flash memory of the module permanently.
Output Enable: This is used to output a DA conversion signal based on the assigned channel.
Allocation Example
IO-SA0004C
The IO-SA0004C (current) is allocated one WORD of X (Xn.0 ~ Xn.F) and one WORD of Y (Yn.0 ~ Yn.F).
n is a number representing the IO-SA0004C‘s position within the chassis.
To access the X memory registers for the IO-SA0004C, the X value range is X4.0 ~ X4.F.
To access the Y memory registers for the IO-SA0004C, the Y value range is Y4.0 ~ Y4.F.
IO-SA0004V
The IO-SA0004V (voltage) is allocated one WORD of X (Xn.0 ~ Xn.F) and one WORD of Y (Yn.0 ~ Yn.F).
n is a number representing the IO-SA0004V‘s position within the chassis.
To access the X memory registers for the IO-SA0004V, the X value range is X5.0 ~ X5.F.
To access the Y memory registers for the IO-SA0004V, the Y value range is Y5.0 ~ Y5.F.