Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with Cimon PLC Series (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Supported Series: Cimon PLC Series (Ethernet)
HMI Setting
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | Cimon PLC Series (Ethernet) | ||
| PLC I/F | Ethernet | ||
| Port no. | 10260 | 10260(TCP) / 10262(UDP) |
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| B | X_Bit | DDDh | 0 ~ 511F | |
| B | Y_Bit | DDDh | 0 ~ 511F | |
| B | M_Bit | DDDh | 0 ~ 999F | |
| B | K_Bit | DDDh | 0 ~ 999F | |
| B | L_Bit | DDDh | 0 ~ 999F | |
| B | T | DDDh | 0 ~ 4095 | |
| B | C | DDDh | 0 ~ 4095 | |
| B | F_Bit | DDDh | 0 ~ 127F | |
| W | X | DDD | 0 ~ 511 | |
| W | Y | DDD | 0 ~ 511 | |
| W | M | DDD | 0 ~ 999 | |
| W | K | DDD | 0 ~ 999 | |
| W | L | DDD | 0 ~ 999 | |
| W | TC | DDDD | 0 ~ 4095 | |
| W | CC | DDDD | 0 ~ 4095 | |
| W | D | DDDD | 0 ~ 31999 | |
| W | F | DDD | 0 ~ 127 | |
| W | Z | DDDD | 0 ~ 2047 | |
| W | S | DD | 0 ~ 99 | |
| W | TS | DDDD | 0 ~ 4095 | |
| W | CS | DDDD | 0 ~ 4095 |
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
