Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with Cimon CM3-SP32MDT/SP16MDR/V/E/F (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Supported Series: CM3-SP32MDT/SP16MDR/V/E/F
Website: https://www.cimon.com/
HMI Settings
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | Cimon CM3-SP32MDT/SP16MDR/V/E/F(Ethernet) | ||
| PLC I/F | Ethernet | Use UDP | |
| Port no. | 10266 |
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| B | X | DDh | 0 ~ 63F | |
| B | Y | DDh | 0 ~ 63F | |
| B | M | DDDh | 0 ~ 511F | |
| B | L | DDDh | 0 ~ 255F | |
| B | K | DDDh | 0 ~ 255F | |
| B | F | DDDh | 0 ~ 127F | |
| B | T | DDD | 0 ~ 511 | |
| B | C | DDD | 0 ~ 511 | |
| B | Q | DDDh | 0 ~ 511F | |
| W | S_Bit | DDDD | 0 ~ 9999 | |
| W | S | DD | 0 ~ 99 | |
| W | R | DD | 0 ~ 15 | |
| W | D | DDDD | 0 ~ 9999 | |
| W | Z | DDDD | 0 ~ 1063 | |
| W | TC | DDDD | 0 ~ 1023 | |
| W | TS | DDDD | 0 ~ 1023 | |
| W | CC | DDDD | 0 ~ 1023 | |
| W | CS | DDDD | 0 ~ 1023 |
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
