Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with VIPA 200, for ex. 214-2BT10 (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Protocol: Ethernet
HMI Settings
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | VIPA 200, for ex. 214-2BT10 (Ethernet) | ||
| PLC I/F | Ethernet | ||
| Port no. | 102 | ||
| PLC sta. no. | 1 | 0–31 |
Device Address
| Bit/Word | Device | Format | Range | Memo |
|---|---|---|---|---|
| B | I | DDDDo | 0 ~ 40957 | Input (I) |
| B | Q | DDDDo | 0 ~ 40957 | Output (O) |
| B | M | DDDDo | 0 ~ 40957 | Bit Memory |
| B | VW_Bit | DDDDDo | 0 ~ 102397 | V Memory Bit Address |
| B | S | DDDDo | 0 ~ 40957 | SCR |
| B | SM | DDDDo | 0 ~ 40957 | Special Memory |
| W | VW | DDDDD | 0 ~ 10239 | V Memory |
| DW | VD | DDDDD | 0 ~ 10239 | V Memory Double Word |
| W | VW_String | DDDDD | 0 ~ 10239 | String |
| DW | VD_String | DDDDD | 0 ~ 10239 | String |
| DW | MD | DDDDD | 0 ~ 10239 | Word Memory |
| Byte | VB | DDDDD | 0 ~ 10239 | |
| Byte | SB | DDDDD | 0 ~ 10239 | SCR |
| W | SW | DDDDD | 0 ~ 10239 | SCR |
| DW | SD | DDDDD | 0 ~ 10239 | SCR |
| Byte | SMB | DDDDD | 0 ~ 10239 | Special Memory |
| W | SMW | DDDDD | 0 ~ 10239 | Special Memory |
| DW | SMD | DDDDD | 0 ~ 10239 | Special Memory |
NOTE: Double word and floating point values must use the VD device type.
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
