Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with Danfoss ECL Apex20 (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Website: http://www.danfoss.com/
HMI Setting
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | Danfoss ECL Apex20 (Ethernet) | ||
| PLC I/F | Ethernet | ||
| Port no. | 5050 | ||
| PLC sta. no. | 0 |
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| B | Flag | DDDD | 0 ~ 8191 | |
| B | Output | DDDD | 0 ~ 1023 | |
| B | Input | DDDD | 0 ~ 1023 | |
| B | Reg_Bit | DDDDDdd | 0 ~ 1638331 | dd: Bit no. (00 ~ 31) |
| B | DBn_Bit | DDDDDDDdd | 0 ~ 399938331 | |
| W | Register | DDDDD | 0 ~ 16383 | |
| W | Counter | DDDD | 0 ~ 1599 | |
| W | Timer | DDDD | 0 ~ 1599 | |
| W | Reg_Float | DDDDD | 0 ~ 16383 | Support 32-bit float format |
| W | DBn | DDDDDDDDD | 0 ~ 536016383 | |
| W | DB_String | DDDDDDDDD | 0 ~ 536016383 | |
| W | R_String | DDDDD | 0 ~ 16383 | |
| W | DB_Float | DDDDDDDDD | 0 ~ 536016383 |
EasyBuilder device address range may differ from PLC extended mode, please refer to EasyBuilder address range as above.
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
