The leader in industrial automation and control solutions

Introduction

All Maple Systems HMI Touch Screens programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with Siemens S7-200 SMART Ethernet. Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.

Supported Series: Siemens S7/200 SMART Series Ethernet Module

Website: www.siemens.com

HMI Setting

ParametersRecommendedOptionsNotes
PLC typeSiemens S7-200 SMART (Ethernet)
PLC I/FEthernet
Port no.102
PLC sta. no.2
Online simulatorYes
Multiple HMI connectionYes (8 HMI)

NOTE: At most four HMIs can be connected with the PLC simultaneously.

Device Address

Bit/WordDeviceFormatRangeMemo
BIDDDDo0 ~ 12797Input
BQDDDDo0 ~ 12797Output
BMDDo0 ~ 637Bit Memory
BVDDDDDDo0 ~ 1023997V Memory Bit
BSDDo0 ~ 317SCR
BSMDDDDo0 ~ 20477Special Memory Bit
BTimerDDD0 ~ 511Timer
BCounterDDD0 ~ 511Counter
WIWDDDD0 ~ 1278Input
WQWDDDD0 ~ 1278Output
WMWDD0 ~ 62Word Memory
WVWDDDDDD0 ~ 102398V Memory
WSWDD0 ~ 30SCR
WSMWDDDD0 ~ 2046Special Memory
WTDDD0 ~ 511Timer
WCDDD0 ~ 511Counter
WAIWDDD0 ~ 530Analog Input
WAQWDDD0 ~ 530Analog Output
ByteIBDDDD0 ~ 1279Input (Byte)
ByteQBDDDD0 ~ 1279Output (Byte)
ByteMBDD0 ~ 63Memory (Byte)
ByteVBDDDDDD0 ~ 102399V Memory (Byte)
ByteSBDD0 ~ 31SCR (Byte)
ByteSMBDDDD0 ~ 2047Special Memory (Byte)
DWIDDDDD0 ~ 1276Input (Double Word)
DWQDDDDD0 ~ 1276Output (Double Word)
DWMDDD0 ~ 60Memory (Double Word)
DWVDDDDDDD0 ~ 102396V Memory (Double Word)
DWSDDD0 ~ 28SCR (Double Word)
DWSMDDDDD0 ~ 2044Special Memory (Double Word)

NOTE: Double word and floating point value must use VD device type.

Wiring Diagram

The diagram below shows the Ethernet cable wiring.

Ethernet cable wiring showing all 8 twisted-pair connections: W/Orange, Orange, W/Green, Blue, W/Blue, Green, W/Brown, Brown — pins 1–8 on both ends.