Connection Parameters Needed for HMI/cMT Products to Communicate with SHJ A Series using EBPro (EasyBuilder Pro)
Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with SHJ A Series. Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
HMI Setting
Parameters
Recommended
Options
Notes
PLC type
SHJ-A
PLC I/F
RS485 2W
Baud rate
9600
Data bits
8
Parity
None
Stop bits
1
PLC sta. no.
0
Device Address
Bit/Word
Device type
Format
Range
Memo
W
Word
DD
0 ~ 89
Wiring Diagram
NOTE: The serial port pin assignments may vary between HMI models.
