Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with Samsung SPC-10. Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Supported Series: Samsung SPC-10
Website: http://www.samsungelectronics.com/factory_automation/controller/plc/
HMI Settings
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | Samsung SPC-10 | ||
| PLC I/F | RS485 2W | ||
| Baud rate | 9600 | ||
| Data bits | None | ||
| Parity | 8 | ||
| Stop bits | 1 | ||
| PLC sta. no. | 192 |
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| B | R | DDDDdd | 0 ~ 999915 | |
| B | K | DDDDdd | 0 ~ 999915 | |
| B | M | DDDDdd | 0 ~ 999915 | |
| B | F | DDDDdd | 0 ~ 999915 | |
| W | W | DDDD | 0 ~ 9999 |
Wiring Diagram
NOTE: The serial port pin assignments may vary between HMI models.
RS-485 2W
The following is the view from the soldering point of a connector.
| HMI | Direction | PLC |
|---|---|---|
| Pin assignments | RS485 2W 8P Mini-DIN Male |
|
| Data- | ↔ (bidirectional) | 6 |
| Data+ | ↔ (bidirectional) | 7 |
| GND | ↔ (bidirectional) | 5 |