Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with an Omron Ethernet (FINS/TCP). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Supported Series: Non OMRON PLC . (Ethernet FINS)
HMI Settings
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | OMRON Ethernet (FINS/TCP) | ||
| PLC I/F | Ethernet | ||
| Port no. | 9600 | ||
| PLC sta. no. | 0 |
PLC Setting
| Parameter | Value |
|---|---|
| Communication mode | Ethernet (FINS/TCP) protocol |
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| B | CIO_Bit | DDDDDdd | 0 ~ 3276715 | Channel I/O (CIO) |
| B | W_Bit | DDDDDdd | 0 ~ 3276715 | Work Area (WR) |
| B | H_Bit | DDDDDdd | 0 ~ 3276715 | Holding Area (HR) |
| B | A_Bit | DDDDDdd | 0 ~ 3276715 | Auxiliary Relay (AR) (Read Only) |
| B | D_Bit | DDDDDdd | 0 ~ 3276715 | Data Memory (DM) |
| B | T_Bit | DDDDDdd | 0 ~ 3276715 | Timer (TIM) |
| B | C_Bit | DDDDDdd | 0 ~ 3276715 | Counter (CNT) |
| B | C_Flag | DDDD | 0 ~ 4095 | |
| B | T_Flag | DDDD | 0 ~ 4095 | |
| B | EM0_Bit ~ EM18_Bit | DDDDDdd | 0 ~ 3276715 | Extend Memory Bit |
| W | CIO | DDDDD | 0 ~ 32767 | Channel I/O (CIO) |
| W | W | DDDDD | 0 ~ 32767 | Work Area (WR) |
| W | H | DDDDD | 0 ~ 32767 | Holding Area (HR) |
| W | A | DDDDD | 0 ~ 32767 | Auxiliary Relay (AR) (Read Only) |
| W | C | DDDDD | 0 ~ 32767 | Counter (CNT) |
| W | T | DDDDD | 0 ~ 32767 | Timer (TIM) |
| W | D | DDDDD | 0 ~ 32767 | Data Memory (DM) |
| W | EM0 ~ EM18 | DDDDD | 0 ~ 32767 | Extend Memory |
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
