Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with Motrona CT15012B. Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Supported Series: motrona CT15012B
Website: http://motrona.net/index.html
HMI Settings
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | motrona CT15012B | ||
| PLC I/F | RS232 | ||
| Baud rate | 9600 | ||
| Data bits | 7 | ||
| Parity | Even | ||
| Stop bits | 1 | ||
| PLC sta. no. | 11 |
Device Address
| Bit/Word | Device type | Format | Range | Note |
|---|---|---|---|---|
| W | Cn |
DD | 0 ~ 99 |
Wiring Diagram
NOTE: The serial port pin assignments may vary between HMI models.
RS-232
| HMI | Direction | PLC |
|---|---|---|
| Pin assignments | RS232 9P D-Sub Female |
|
| Rx | ↔ (bidirectional) | 3 TXD |
| Tx | ↔ (bidirectional) | 2 RXD |
| GND | ↔ (bidirectional) | 5 GND |