Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with LS Electric XGI Fenet (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Supported Series: LS XGT series XGI CPU with XGL-EFMT 1thernet module
Protocol: LS XGI Fenet (Ethernet) — LS XGT series XGI CPU with XGL-EFMT Ethernet module
Website: http://www.lgis.com/
HMI Settings
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | LS XGI Fenet (Ethernet) | ||
| PLC I/F | Ethernet | ||
| Port no. | 2004 | ||
| PLC sta. no. | 0 |
Device Address
| Bit/Word | Device Type | Format | Range | Memo |
|---|---|---|---|---|
| B | AW_Bit | DDDDDDh | 0 ~ 262143f | |
| B | IW_Bit | DDD.DD.Dh | 0 ~ 127.15.3f | |
| B | QW_Bit | DDD.DD.Dh | 0 ~ 127.15.3f | |
| B | MW_Bit | DDDDDDDh | 0 ~ 1048575f | |
| B | RW_Bit | DDDDDh | 0 ~ 32767f | |
| B | WW_Bit | DDDDDDh | 0 ~ 524287f | |
| B | FW_Bit | DDDDh | 0 ~ 9125f | |
| B | KW_Bit | DDDDDh | 0 ~ 65535f | |
| B | LW_Bit | DDDDDh | 0 ~ 11263f | |
| B | NW_Bit | DDDDDh | 0 ~ 25087f | |
| B | UW_Bit | DD.DD.DDh | 0 ~ 31.15.31f | |
| B | AX | DDDDDDD | 0 ~ 4194303 | |
| B | IX | DDD.DD.DD | 0 ~ 127.15.63 | |
| B | QX | DDD.DD.DD | 0 ~ 127.15.63 | |
| B | MX | DDDDDDD | 0 ~ 16777199 | |
| B | RX | DDDDDD | 0 ~ 524287 | |
| B | WX | DDDDDDD | 0 ~ 8388607 | |
| B | FX | DDDDDD | 0 ~ 146015 | |
| B | KX | DDDDDDD | 0 ~ 1048575 | |
| B | LX | DDDDDDD | 0 ~ 1880223 | |
| B | NX | DDDDDD | 0 ~ 401407 | |
| B | UX | DD.DD.DDD | 0 ~ 31.15.511 | |
| W | AW | DDDDDD | 0 ~ 262143 | |
| W | IW | DDD.DD.D | 0 ~ 127.15.3 | |
| W | QW | DDD.DD.D | 0 ~ 127.15.3 | |
| W | MW | DDDDDDD | 0 ~ 1048575 | |
| W | RW | DDDDD | 0 ~ 32767 | |
| W | WW | DDDDDD | 0 ~ 524287 | |
| W | FW | DDDDD | 0 ~ 65535 | |
| W | KW | DDDD | 0 ~ 9125 | |
| W | LW | DDDDD | 0 ~ 11263 | |
| W | NW | DDDDD | 0 ~ 25087 | |
| W | UW | DD.DD.DD | 0 ~ 31.15.31 | |
| DW | MD | DDDDDD | 0 ~ 524288 | |
| Byte | MB | DDDDDDD | 0 ~ 2097151 | |
| LW | ML | DDDDDD | 0 ~ 262143 |
Wiring Diagram
NOTE: Ethernet cable — use a standard straight-through Cat5e or Cat6 Ethernet cable to connect the HMI to the LS XGT PLC Ethernet module.
The diagram below shows the Ethernet cable wiring.
