Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with Inovance Easy Series (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Supported Series: Inovance Easy Series
Website: http://www.inovance.cn/
HMI Setting
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | Inovance Easy Series (Ethernet) | ||
| PLC I/F | Ethernet | ||
| Port no. | 502 |
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| B | M | DDDD | 0 ~ 7999 | |
| B | B | DDDDD | 0 ~ 32767 | |
| B | S | DDDD | 0 ~ 4096 | |
| B | X | OOOO | 0 ~ 1777 | |
| B | Y | OOOO | 0 ~ 1777 | |
| B | D_Bit | DDDDdd | 0 ~ 79991 | |
| B | R_Bit | DDDDDdd | 0 ~ 327671 | |
| W | D | DDDD | 0 ~ 7999 | |
| W | R | DDDDD | 0 ~ 32767 |
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
