Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with Hangzhou Maiou MO-TECH. Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Website: http://www.zjmaiou.com/
HMI Settings
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | Hangzhou Maiou MO-TECH | ||
| PLC I/F | RS232 | ||
| Baud rate | 9600 | ||
| Data bits | 8 | ||
| Parity | None | ||
| Stop bits | 1 | ||
| PLC sta. no. | 1 |
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| B | MWX | DDDdd | 0 ~ 25515 | |
| B | MWX_NO_RPS | DDDdd | 0 ~ 25515 | |
| W | MW | DDD | 0 ~ 255 | |
| W | MW_NO_RPS | DDD | 0 ~ 255 |
Wiring Diagram
NOTE: The serial port pin assignments may vary between HMI models.
RS-232
| HMI | Direction | PLC |
|---|---|---|
| Pin assignments | RS232 Terminal | |
| Rx | ↔ (bidirectional) | TD |
| Tx | ↔ (bidirectional) | RD |
| GND | ↔ (bidirectional) | GND |