1.       Connect a USB flash
drive to HMI #1. The Download/Upload window pops up.

2.       Select “Upload” and
then “Upload History Files,” then enter the password (default: 111111) and click
OK.

3.      
In the “Pick a
Directory” window, click the + sign in front of usbdisk and select the
“disk_a_1” directory. Click OK and the History files will get uploaded to the
USB flash drive.

4.      
Unplug the USB flash
drive from HMI #1 and plug it into HMI #2. The Download/Upload window pops up.

5.      
Select “Download”
and then “Download History Files,” then enter the password (default: 111111)
and click OK.

6.      
In the “Pick a
Directory” window, click the + sign in front of usbdisk and select the
“disk_a_1” directory. Click OK and the History files will get downloaded to the
USB flash drive.

7.      
IMPORTANT: When the
download is complete, the Download/Upload window reappears. Select “Restart
project and exit.” This will update the recipe data in the HMI.

Note: The cMT Series menus are
slightly different, but the same basic procedure applies.
This method cannot be used with the cMT-SVR. Use the Upload/Download feature in
EBPro or the Utility Manager instead.