How do I get started with CODESYS on Maple Systems devices?

First you’ll want to make sure your device supports CODESYS:

HMIs with CODESYS pre-activated

Next, you’ll need to install the CODESYS Development System on your PC. This installs the IDE only, not the runtime on your device (we’ll get there):

Go to Maple Systems Software Downloads and Upgrades
Click on the download link for CODESYS IDE (32bit or 64bit)

Then, make sure to install our add on package. This ensures CODESYS knows how to talk to your cMT device:

Go to Maple Systems Software Downloads and Upgrades
Click on the download link for CODESYS & Remote IO Package

Now, we’re going to install and update the CODESYS Runtime on your Maple Systems device:

If you don’t have EBPro installed, go to Maple Systems Software Downloads and Upgrades and click the download link for EBPro.
Once that’s installed, open EBPro Utility Manager and choose the model number of the device you’re using.
Select CODESYS Firmware Upgrade. The latest Firmware can be found in the Software Downloads and Upgrades page.

Your HMI has now become a PLC runtime that can execute IEC 61131-3 Logic!

Ensure your PC and cMT device are on the same network/subnet. Your device will show a CODESYS runtime IP address on the screen, you’ll need this IP to connect from CODESYS IDE.

To create a new CODESYS project, in the CODESYS IDE system:

Click on File – New Project
Choose the model number (this will only show up after you’ve installed the CODESYS & Remote IO Package)
Select your preferred programming language (LD, ST, FBD, SFC, etc.)

Now you’re ready to create your project, download it, run and debug!

Manuals & Guides

Sample Projects

Tutorials

CODESYS Tutorials

Tech Notes

See our list of Tech Notes

Solutions

See our Case Studies & Solutions

Controller Information Sheets

See our list of Controller Information Sheets

Videos

See our list of Training Videos