Converting from EZware Plus to EBPro
Technical Note 5125
Applicable Model(s)
HMI5000 Series
Title
Converting from EZware Plus to EBPro
Date
01/11/2023
Rev
02
P/N
0907-5125
Summary
This document provides guidelines for converting an application from EZwarePlus to EBPro.
Solution
1.
Using the Compress utility in EZwarePlus, compress the EZwarePlus project. This utility is found in Tools -> Compress/Uncompress. This will create a new file with the same name as the project, but with the file extension .ECMP. This is required to be sure that all the dependencies, such as library files, are transferred to EBPro.
2.
Download and install EBPro from the Maple Systems Software & Upgrades page.
3.
Open EBPro and open the Compress/Uncompress utility, located in File -> Compress/Uncompress. Select the compressed file, file extension .ECMP. Also set a destination to uncompress to. Finally, click the Uncompress button.
