Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with INVT GD5000 Series (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Website: http://www.invt.com/
HMI Settings
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | Invt GD5000 Series (Ethernet) | Use UDP | |
| PLC I/F | Ethernet | ||
| Port no. | 6000 |
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| W | Reg_A | HHHH | 0 ~ FFFF | |
| W | Reg_M | HHHH | 0 ~ FFFF |
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
