Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with Brother Speedio (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Supported Series: Brother Speedio (Ethernet)
Website: http://www.brother.com/index.htm
HMI Setting
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | Brother Speedio (Ethernet) | ||
| PLC I/F | Ethernet | ||
| Port no. | 10000 |
Device Address
| Bit/Word | Device type | Format | Range |
|---|---|---|---|
| B | X | HHH | 0 ~ 3FF |
| B | Y | HHH | 0 ~ 3FF |
| B | BX | HHH | 0 ~ 3FF |
| B | BY | HHH | 0 ~ 3FF |
| B | M | DDDD | 0 ~ 8191 |
| B | LM_HS1 | DDDD | 0 ~ 1023 |
| B | LM_S1 | DDDD | 0 ~ 1023 |
| B | LM_HS2 | DDDD | 0 ~ 1023 |
| B | LM_S2 | DDDD | 0 ~ 1023 |
| W | BDX | DDD | 0 ~ 255 |
| W | BDY | DDD | 0 ~ 255 |
| W | D | DDDD | 0 ~ 2047 |
| W | LD_HS1 | DDDD | 0 ~ 2047 |
| W | LT_CV_HS1 | DDD | 0 ~ 255 |
| W | LT_SV_HS1 | DDD | 0 ~ 255 |
| W | LC_CV_HS1 | DDD | 0 ~ 255 |
| W | LC_SV_HS1 | DDD | 0 ~ 255 |
| W | LD_S1 | DDDD | 0 ~ 2047 |
| W | LT_CV_S1 | DDD | 0 ~ 255 |
| W | LT_SV_S1 | DDD | 0 ~ 255 |
| W | LC_CV_S1 | DDD | 0 ~ 255 |
| W | LC_SV_S1 | DDD | 0 ~ 255 |
| W | LD_HS2 | DDDD | 0 ~ 2047 |
| W | LT_CV_HS2 | DDD | 0 ~ 255 |
| W | LT_SV_HS2 | DDD | 0 ~ 255 |
| W | LC_CV_HS2 | DDD | 0 ~ 255 |
| W | LC_SV_HS2 | DDD | 0 ~ 255 |
| W | LD_S2 | DDDD | 0 ~ 2047 |
| W | LT_CV_S2 | DDD | 0 ~ 255 |
| W | LT_SV_S2 | DDD | 0 ~ 255 |
| W | LC_CV_S2 | DDD | 0 ~ 255 |
| W | LC_SV_S2 | DDD | 0 ~ 255 |
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
