Controlling a VFD with a PLC and an HMI

This sample project will cover how to control the speed of a motor using a Maple PLC and PWM Module while utilizing ladder diagram logic in the control software (MapleLogic).

This sample project will cover the configurations using the built-in High Speed Counter for the Maple PLC’s and determining motor speed using a Quadrature Encoder in the control software (MapleLogic).

This sample project demonstrates how to connect any Maple Systems PLC to an MQTT Broker using one of our IIoT Communication Gateways.

In this integration tutorial, you’ll learn how to connect a Maple Systems HMI + PLC unit to a Maple Systems PLC. We’ll cover all the configuration steps in MAPware-7000 and MapleLogic for both serial and Ethernet connections, as well as data manipulations you’ll need on the HMI + PLC side.

In this tutorial, you’ll learn how to connect a Maple Systems HMI to an OPC UA setup. We’ll cover project initialization, importing OPC UA tags into an HMI project, and connecting your HMI to OPC UA as both a client and as a server.

Demonstrates the essential steps for integrating Maple Systems remote I/O with a Maple Systems HMI using Modbus TCP in a PLC-less architecture.

How to integrate cameras with a Maple Systems HMI using EBPro to provide real-time machine visualization and troubleshooting support. Configure camera connections, build an HMI project, and display live video feeds for applications such as jam detection, label verification, and operator monitoring.

Learn how a Maple Systems HMI can act as the control point for an Andon system without using a PLC. You will see how the HMI communicates with remote I/O over Modbus TCP to drive red, yellow, and green stack lights. This sample project shows how to configure both EBPro and EasyRemote I/O for a simple PLC-less architecture.