How to Activate and Go Online with CODESYS on an HMI
Software Required
Hardware Required
- cMT3102Xv2 – Other cMT Devices can be used.
- CODESYS Activation Card
CODESYS Activation
CODESYS Activation Card
Enter the CODESYS Activation Code.
If activation is successful, you will receive this message.
Reboot the cMT device. CODESYS logo will appear on startup.
After the cMT device is rebooted, CODESYS is now activated.
User Interface & CODESYS Application
cMT Viewer. Toggle Switch ON and Bit Lamp ON. Numeric display of 100.
CODESYS Application reflecting cMT Viewer. Logged in and running the application. [Write BOOL] is turned ON [TRUE]. [Test INT] is displayed 100.
Sample Project
The project shown above was designed for the specific hardware mentioned at the beginning of the tutorial and is intended to provide you guidance when programming your unit. If you are using models other than the ones specified in this sample project, similar steps can be duplicated within your own project.
Download CODESYS Sample Project
Download EBPro Sample Project
Resources & Documentation
CODESYS Resources
- Activate CODESYS on cMT Models
- How to use Built-in CODESYS with later version of the CODESYS IDE
- CODESYS Quick Start Guide
- EBPro Quick Start Guide
More
See our Support Center for a complete list of Quick Start and Installation Guides