When a project is uploaded to a USB flash drive or SD card from a Maple Systems HMI, the file format will not allow you to decompile or open the file without adding an EXOB extension to the file. Step by Step instructions can be found in Tech Note 5057 – Uploading a Project from…
To upload a project from an HMI+PLC (HMC Series): In order to upload a project from an HMC Series, the project in the HMC must be preconfigured with a button to turn on system bit S00037 (USB host menu trigger). Turning ON this bit will cause the “Memory Stick Operation” window to pop up. When…
Read More I’m having trouble uploading from my HMI+PLC (HMC) to a USB Flash Drive.
With the HMI connected to the PC via USB or Ethernet cable, click the File menu in EBPro and select Upload, or open Utility Manager and click the Upload button. Select your HMI type. Click Browse to select the file location and provide a name for the file. Select your connection type. If uploading via…
Read More How do I upload a project from my Maple Systems HMI?
Make sure you are using a USB 2.0 port on your PC to download to the Maple Systems HMI. Our HMIs do not support USB 3.0. Refer to unit specifications for more information. Software Downloads & Upgrades FAQ Sheets Manuals & Guides Tech Notes Sample Projects Controller Information Sheets Communication Cables
Read More Why do I see errors in the download window when downloading over a USB cable?
Uploading is the act of taking a project from the HMI and bringing it to the computer. Software Downloads & Upgrades Manuals & Guides Tech Notes Videos Sample Projects Controller Information Sheets Communication Cables
Downloading is taking a project from the computer and putting it into the HMI. Software Downloads & Upgrades Manuals & Guides Tech Notes Sample Projects Controller Information Sheets Communication Cables
In EBPro, click on the File menu and select Preferences. On the Project tab, check the “Generate backup of project file before save” option. This will create a backup of your project any time you save it with a *.bak1 extension. Subsequent saves will rename the backup file with a *.bak2 and finally *.bak3 extension,…
EBPro is used to Upload/Download from all current generation HMIs. To avoid any confusion, in all of our documentation: Upload means transfer the project file from the HMI to your PC. Download means transfer the project from your PC to the HMI. Downloading: Downloading a project is most commonly done using EB Pro. Go to…
Read More How do I Upload / Download a project from / to my HMI?
Yes, based on the model, you can download a project using a USB flash drive or SD card. See Tech Note 5087, “Download a Project to an HMI with a USB Flash Drive or SD Card” for more information. Software Downloads & Upgrades Manuals & Guides Tech Notes Videos Sample Projects Controller Information Sheets Communication…
Read More Can I use a USB Flash Drive or SD Card to Download a project to my Maple Systems HMI?
If you experience difficulty downloading to an HMI+PLC (HMC) from MAPware-7000 with a Windows® 10 operating system, you may need to re-install the MAPware-7000 USB Drivers. The MAPware-7000 USB drivers are located in the folder: C:MapleSystemsMAPware7000USB Drivers. Refer to Tech Note 7017, “Reinstall MAPware-7000 USB Drivers” for full instructions on how to delete and reinstall…