This issue is due to increased security on many email platforms. The solution to this error is to allow less secure apps in your email account information or to use app specific passwords, depending on which email provider you use.
Any alarm or event in EBPro can be set up so that an Email is sent once a trigger condition is met. SMS and MMS notifications can also be sent to users of your HMI application via the built-in SMTP email server on Maple Systems Advanced and Smart cMT HMIs.
Read More How do I send SMS (text message) or MMS notifications out from my HMI?
An alarm can be used to wake up the HMI when it is in screen saver mode. The screen saver feature just changes the Base Window ID to the ID number of the screensaver window (80 by default, you can adjust this in the system parameter settings). The Base Window ID is stored in system register LW-9050.
Read More Can I use an alarm to “wake up” the HMI when it is in screensaver mode?
Alarms are a two-part feature: Because features and functionality vary between our Standard, Advanced, and High-Performance HMIs, refer to the software and programming manual for more information on this feature..
The Event Display in EBPro displays both the currently active and previous alarms in a spreadsheet style object, and has the ability to show historical alarms as well (real-time by default). The Event Display can also show more than just the time and the alarm message, it can show an occurrence count, event trigger time,…
The Alarm Bar in EBPro displays the active alarms in a scrolling marquee, one after the other.
The Alarm Display in EBPro displays the active alarms in a spreadsheet style object. The Alarm Display can show more than just the event trigger time and the alarm message. It can also show an occurrence count, event trigger date, and elapsed time an alarm has been active.
The Event (Alarm) Log in EBPro is where alarms are defined and configured. Alarms can be bit- or word-level, and can reference a PLC or the local HMI. Each alarm is configured individually, and can be assigned to one of up to 255 categories (for viewing purposes).
Yes, once the Alarm has been setup, it can be configured in EBPro to send an email notification via email. Watch the Enabling Email Push Notifications video to see how it is done.
You can have up to 10,000 event/alarms configured in an EBPro a project.
If the HMI fails to send an email, first press the “Test SMTP Settings” button in the EBPro System Parameters e-Mail tab to confirm that the SMTP settings are correct. If it successfully sends an email from your PC, but not from the HMI, verify that the HMI is connected to a network that has…
After adding a new recipient to your project in EBPro, make sure the “Use existing contact settings on HMI first (if existed)” option is NOT selected in the System Parameters e-Mail tab. If it is selected, then the updates to the recipient list will not be downloaded to the HMI.
Read More I added a new recipient to my email list, but it isn’t there after I download the project.