There are multiple ways to toggle a bit in MAPware7000, One option is to use the Toggle bit in the “Quick Buttons” menu or the Toggle bit task available for screens and task buttons.
Another option is to use logic.
If you want to use a momentary input, as seen in the figure below, to latch a coil:
You can use the following logic to create the latch:
This is just a simple example to demonstrate the concept, which can be applied to creating a latch for any momentary input such as a digital input coil on an IO module.
Software Downloads & Upgrades
Manuals & Guides
- HMC Series Installation Guide
- MAPware-7000 Programming Manual
- MAPware-7000 Ladder Logic Guide
- Mapware-7000 Getting Started Guide
- HMC3000 I/O Module Guide
- HMC7000 I/O Module Guide
- MAPware-7000 IEC61131 Programming Guide
Videos
- Part 1: Introduction and Installation
- Part 2: Creating a Native Ladder Project
- Part 3: Adding and Initializing Tags
- Part 4: Adding Logic
- Part 5: Creating an HMI Screen
- Part 6: Duplicationg an HMI Screen
- Part 7: Downloading and Testing the Project
- Part 8: Creating an IEC Project
- Part 9: Creating a UDFB
- Part 10: Adding a Structure Text UDFB
- Part 11: Adding Power Up and Main Routine Logic
- Part 12: Creating Screen Objects
- Part 13: Downloading the Project and Online Monitoring
Sample Projects