Your cart is currently empty!
Applicable Model(s)
MAP450D
MAP450B
Title
Comparison Between the MAP450D and MAP450B
Date
10/23/2023
Rev
00
P/N
0907-1067
The MAP450D uses the same enclosure, display, keyboard, and overlay as the MAP450B, but
includes the following differences:
| MAP450D | MAP450B |
|---|---|
| Windows-based STEPware-100 configuration software (optional) | No configuration software |
| Stores up to 500 user-definable messages in flash memory that can be displayed with a simple command | No user-definable messages |
| Stores configuration parameters in flash memory | Stores configuration parameters in serial EEPROM |
| CE mark (passes strenuous tests for noise immunity and emissions) | No CE mark |
| Local setup mode is entered by pressing and holding the Clear key while the <<>> prompt is on the display or by pressing the Enter key three times after initialization | Local setup mode is entered by pressing the S key while the <<>> prompt is on the display |
| +12 to 30 VDC power supply input | +5 or 8 to 13 VDC power supply input |
| Two LCD viewing angles | Ten LCD viewing angles |
| Non-removable terminal block with different pinout for communications and power wiring | Removable terminal block for communications and power wiring |
The Set Serial Interface Command (ESC S) is no longer supported. However, to maintain backwards compatibility the command is recognized but ignored.