What is the Default IP address of a Maple Systems PLC?

To find the default IP address of your new PLC, and to change its IP address, first click the red Parameter folder in the project window menu in MapleLogic, then click PLC Parameter.

Then, in the PLC parameters, click the Ethernet tab. You will see the default IP address set to 100.100.100.100. This is the default IP address of the physical PLC out of box. From here you can set the IP address to the desired IP and subnet mask. The gateway can be left as is unless you need it set to something else. Once complete, click OK to save the changes.

It is best recommended to download these changed settings to the PLC via USB cable first (You can buy one from us at Part Number 7431-0115), so as not to have to change your PC’s IP address to match the network of the PLC. Once the settings are downloaded (Online tab, then link+download+monitor), the PLC’s IP will now reflect the desired IP address.

Content created by Support Team