Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with Yaskawa Electric MP Series Memobus (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Supported Series: YASKAWA MP2200, MP2300, MP2300S, MP9xx with 218IF-02 Ethernet Module
Website: www.yaskawa.com
HMI Setting
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | YASKAWA MP Series Memobus (Ethernet) | ||
| PLC I/F | Ethernet | ||
| Port no. | 502 |
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| B | MB | DDDDDh | 0 ~ 65534F | |
| B | IB | HHHHH | 0 ~ A7FFF | Read only |
| B | IW_Bit | HHHHdd | 0 ~ A7FF15 | Read only |
| W | IW | HHHH | 0 ~ A7FF | Read only |
| DW | IL | HHHH | 0 ~ A7FF | Read only |
| DW | IF | HHHH | 0 ~ A7FF | Float, Read only |
| W | MW | DDDDD | 0 ~ 65534 | |
| DW | ML | DDDDD | 0 ~ 65533 | |
| DW | MF | DDDDD | 0 ~ 65533 | Float |
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
