The leader in industrial automation and control solutions

Introduction

All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with LS Electric XEC FEnet (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.

Supported Series: LS XGB Series XEC CPU with XGL-EFMT 1thernet module

Website: http://www.lgis.com/

HMI Settings

ParameterRecommendedNotes
PLC TypeLS XEC Fenet (Ethernet)
PLC I/FEthernet
Port No.2004

Device Address

Bit/WordDeviceFormatRangeMemo
BAW_BitDDDDDh0 ~ 16383fAutomatic variable bit
BIW_BitDDD.DD.Df0 ~ 127.15.3fInput device bit
BQW_BitDDD.DD.Df0 ~ 127.15.3fOutput device bit
BMW_BitDDDDDDDh0 ~ 1048575fDirect variable bit
BRW_BitDDDDDh0 ~ 16383fDirect variable bit
BWW_BitDDDDDh0 ~ 32767fDirect variable bit
BFW_BitDDDDh0 ~ 9125fSystem flag bit
BKW_BitDDDDDh0 ~ 65535fBuilt-in special flag bit
BLW_BitDDDDh0 ~ 4095fHigh speed link flag bit
BNW_BitDDDDh0 ~ 5119fP2P flag bit
BUW_BitDD.DD.DDf0 ~ 31.15.31fAnalog flag bit
BAXDDDDDD0 ~ 262143
BIXDDD.DD.DD0 ~ 127.15.63
BQXDDD.DD.DD0 ~ 127.15.63
BMXDDDDDDDD0 ~ 16777199
BRXDDDDDD0 ~ 262143
BWXDDDDDD0 ~ 524287
BFXDDDDDD0 ~ 146015
BKXDDDDDDD0 ~ 1048575
BLXDDDDD0 ~ 65535
BNXDDDDD0 ~ 81919
BUXDD.DD.DDD0 ~ 31.15.511
WAWDDDDD0 ~ 16383Automatic variable
WIWDDD.DD.D0 ~ 127.15.3Input device
WQWDDD.DD.D0 ~ 127.15.3Output device
WMWDDDDDDD0 ~ 1048575Direct variable
WRWDDDDD0 ~ 16383Direct variable
WWWDDDDD0 ~ 32767Direct variable
WFWDDDDD0 ~ 65535System flag
WKWDDDD0 ~ 9125Built-in special flag
WLWDDDD0 ~ 4095High speed link flag
WNWDDDD0 ~ 5119P2P flag
WUWDD.DD.DD0 ~ 31.15.31Analog flag
DWMDDDDDDD0 ~ 524288

Wiring Diagram

The diagram below shows the Ethernet cable wiring.

Ethernet straight-through cable wiring diagram showing all 8 color-coded wire pairs connected pin-to-pin from one end to the other.