Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with LS Electric GLOFA FEnet (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Website: http://www.lgis.com/
HMI Settings
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | LS GLOFA FEnet (Ethernet) | ||
| PLC I/F | Ethernet | ||
| Port no. | 2004 | ||
| PLC sta. no. | 0 | 0~31 |
Device Addresses
| Bit/Word | Device Type | Format | Range | Memo |
|---|---|---|---|---|
| B | MX | DDDDDD | 0 ~ 131056 | Internal Relay |
| B | IX | ddDdd | 0 ~ 63763 | Input |
| B | QX | ddDdd | 0 ~ 63763 | Output |
| W | MW | DDDD | 0 ~ 8191 | Data Register |
| DW | MD | DDDD | 0 ~ 4095 | Double Word |
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
