Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with an Omron CP Series (USB). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Supported Series: OMRON CP1E CPU Module USB Port
HMI Settings
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | OMRON CP Series (USB) | ||
| PLC I/F | USB | USB Host | |
| Online simulator | No |
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| B | CIO_Bit | DDDdd | 0 ~ 28915 | Channel I/O (CIO) |
| B | A_Bit | DDDdd | 0 ~ 75315 | Auxiliary Relay (AR) |
| B | T_Bit | DDDdd | 0 ~ 25515 | Timer (TIM) |
| B | C_Bit | DDDdd | 0 ~ 25515 | Counter (CNT) |
| B | D_Bit | DDDDdd | 0 ~ 204715 | Data Memory (DM) |
| B | H_Bit | DDdd | 0 ~ 4915 | Holding Area (HR) |
| B | W_Bit | DDdd | 0 ~ 9915 | Work Area (WR) |
| W | CIO | DDD | 0 ~ 289 | Channel I/O (CIO) |
| W | A | DDD | 0 ~ 753 | Auxiliary Relay (AR) |
| W | T | DDD | 0 ~ 255 | Timer (TIM) |
| W | C | DDD | 0 ~ 255 | Counter (CNT) |
| W | D | DDDD | 0 ~ 2047 | Data Memory (DM) |
| W | H | DD | 0 ~ 49 | Holding Area (HR) |
| W | W | DD | 0 ~ 99 | Work Area (WR) |
Website: http://www.omron.com/