Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with INVT TS600 Series (Ethernet). Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Supported Series: Invt TS600 Series
Website: http://www.invt.com/
HMI Setting
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | Invt TS600 Series (Ethernet) | ||
| PLC I/F | Ethernet | ||
| Port no. | 502 | ||
| PLC sta. no. | 1 |
NOTE: Correct communication is possible in run mode, but communication is interrupted in stop mode.
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| B | M | DDDDD | 0 ~ 32767 | |
| B | S | DDDD | 0 ~ 4095 | |
| B | X | OOOo | 0 ~ 1777 | |
| B | Y | OOOo | 0 ~ 1777 | |
| B | T_Bit | DDD | 0 ~ 399 | *Note1 |
| B | C_Bit | DDD | 0 ~ 255 | |
| W | D | DDDDD | 0 ~ 32767 | |
| W | R | DDDDD | 0 ~ 16383 | |
| W | T | DDD | 0 ~ 399 | *Note1 |
| W | C | DDD | 0 ~ 199 | 16-bit |
| DW | C_EX | DDD | 200 ~ 255 | 32-bit |
| W | Z | DD | 0 ~ 15 |
*Note1: T0 ~ T199: 100ms, T200 ~ T299: 10ms, T300 ~ T399: 1ms
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
