The IP address for the HMI is configured in the System Settings window in the HMI.
When you first receive your HMI, it is running the demo project for that particular model. You will see an arrow in the bottom-right corner of the screen that gives you access to the System Toolbar when you touch it (on a cMT it is the orange circle in the upper-left corner of the screen).
Touch the arrow, then touch the “gear” icon to enter the System Settings window (the default system password is 111111). The first tab in the System Settings window is the network tab, which is where you configure the IP address of the HMI.
Please refer to Tech Note 5077 (IP Addresses of an HMI and a PC) or Tech Note 5112 (What’s my IP Address? in EBPro) for more information.
*Depending on the age of the unit, the default password on the HMI could be m1111111.
Software Downloads & Upgrades
Manuals & Guides
- EBPro Programming Manual
- EBPro Quick Start Guide
- HMI5000L Series Installation Guide
- HMI5000P Installation Guide
Tech Notes
- Multiple HMIs connecting to one PLC
- PLC No Response
- What is my IP Address?
- IP Addresses of an HMI and a PC
Videos
- Product Overview
- Quick Start: Part 1 – Introduction and Installation
- Quick Start: Part 2 – Create a Project
- Quick Start: Part 3 – Creating Windows
- Quick Start: Part 4 – Creating Static Elements
- Quick Start: Part 5 – Creating Digital Objects
- Quick Start: Part 6 – Create and Group Analog Objects
- Quick Start: Part 7 – Simulation Mode
- VNC Control
- Troubleshooting ‘PLC No Response’ on Maple Systems HMIs
Sample Projects
Controller Information Sheets
Communication Cables