Introduction
All Maple Systems HMIs programmed with EBPro (EasyBuilder Pro), including every cMT X Series and cMT Series model, are compatible with Korenix 6550. Configure your Controller and HMI/cMT with the following parameters to establish reliable communication.
Website: http://www.korenix.com/
HMI Setting
| Parameters | Recommended | Options | Notes |
|---|---|---|---|
| PLC type | Korenix 6550 | Modbus protocol | |
| PLC I/F | Ethernet | ||
| Port no. | 502 | ||
| PLC sta. no. | 0 |
Device Address
| Bit/Word | Device type | Format | Range | Memo |
|---|---|---|---|---|
| B | 1x | DDDDD | 1 ~ 65535 | |
| B | 0x | DDDDD | 1 ~ 65535 | |
| B | 3x_Bit | DDDDDdd | 100 ~ 6553515 | |
| B | 4x_Bit | DDDDDdd | 100 ~ 6553515 | |
| B | 6x_Bit | DDDDDdd | 100 ~ 6553515 | |
| W | 3x | DDDDD | 1 ~ 65535 | |
| W | 4x | DDDDD | 1 ~ 65535 | |
| W | 5x | DDDDD | 1 ~ 65535 | |
| W | 6x | DDDDD | 1 ~ 65535 |
Wiring Diagram
The diagram below shows the Ethernet cable wiring.
