FAQ Category: HMI/cMT
HMI/cMT — Frequently Asked Questions
These products are discontinued. Contact [email protected] for upgrade information. The Utility Manager application that comes bundled and installed with EBPro, features a Firmware upgrade utility for the cMT-iV5 and iV6.…
To convert a Standard/Advanced project to a cMT Series project, open the System Parameters and click on the Model tab. Select the cMT Series model you want to use and click OK to close the System Parameters window
Different models of HMI are available in different versions of EB5000. We have several versions of EB5000 available to download for free on our website. If you get a format…
To avoid getting script errors when opening EasyBuilder-5000 or EZwarePlus, click on the View menu and turn off the “Web Bar” in EasyBuilder-5000 and the “Web Window” in EZwarePlus.
Recipes in EZware-5000 are stored in RW memory. If you have tags in the tag library assigned to these RW and RWI addresses, you can export them as a .XLS…
When you use the Translate HM1500 Project option in EasyBuilder-5000 to convert a *.eob file, the Translate tool creates a new project file with a *.mtp extension and it also…
The cMT-iM21 was a 21″ HDMI® compatible display specifically designed for use with the cMT-FHDX. Its now discontinued and replaced by our 21″ MON Series Monitors. Contact our sales department…
No. The cMT-iM21 was an HDMI® display. It did not run any software. The cMT-iM21 is discontinued and replaced by one of our 21″ MON series Industrial Monitors. Contact our…
No. The cMT-iV6 is now discontinued. It required hardwired power and Ethernet connections. It did feature a touchscreen, but it is not a portable system. It also did not have…
No. The cMT-iV6 is now discontinued. It required hardwired power and Ethernet connections. It did feature a touchscreen, but it is not a portable system. It also did not have…
The cMT-iV6 is discontinued, it required no programming. The IP address could be set from the screen. Simply connect it to a 24VDC and plug the display into the cMT-device’s…
EZwarePlus and Ezware-5000 are Maple Systems’ legacy configuration software programs that many of our older and legacy Graphic HMIs used. Our newest software, EBPro is backward compatible in many cases.…
When considering which particular HMI to replace your HMI5070TH, please note that not all replacement models are identical. Refer to Tech Note 5116, “Converting from the HMI5070TH to a new…