Yes. The Maple Modular can add PWM capability by connecting a Pulse Width module that includes 12-CH PWM outputs and 20 additional digital outputs with up to a 4000 Hz duty cycle.
Yes. All Maple Systems PLCs come with 2 channels dedicated to high-speed count, including both the Maple Micro and Maple Modular series PLCs. Maple Modular PLCs can be expanded to have more than 2 HSC channels by adding high-speed count…
Maple Systems PLCs are compatible with any HMI that supports the industry-standard Modbus TCP/IP or Modbus RTU protocols. This includes every Maple Systems HMI that we sell, as well as hundreds of other third-party devices.
Maple Systems PLCs support Modbus TCP/IP and Modbus RTU communications. Modbus communications do not require any licensing or proprietary software to use which means our PLCs can communicate with hundreds of devices, with no extra costs
If your PLC powers on and indicates its in STOP mode, its likely the physical RUN/STOP switch on your PLC is set to STOP mode. You can open the hatch next to the Maple logo and flip the yellow switch to RUN mode.
Yes they all have built in block terminals except the ES1616P which needs a separate terminal block with connector. For I/O modules only the HSC Module and PWM module need a separate terminal block and…
You do not need to order the MOD-SENT01 if you don’t need the PLC to be the Modbus TCP Master device.
Yes, the ES0806R includes an ethernet port for modbus TCP slave. All the PLC‘s are Modbus TCP slave natively.