This tutorial will cover the configurations and IEC Ladder Logic using the High Speed Counter for the HMI + PLC Combo (HMC4070) with an IO Module (HMC3-M1210Y0210-V2) and determining motor speed using a Quadrature Encoder while displaying on the user-interface.
This tutorial shows you how to setup High Speed Counter with an iR-ETN40R Remote I/O and an HMI+PLC combo (HMC-4070) using modbus communication while utilizing MAPware-7000 and Easy Remote IO programming softwares.
This tutorial shows you how to program a PID Loop function with a HMI+PLC Combo programming software while displaying on the user-interface.
This tutorial shows you how to configure Recipes in a HMI+PLC Combo programming software while displaying on the user-interface.
This tutorial shows you how to connect an HMI+PLC combo with a Remote I/O using modbus communication to read the analog input from a J-Thermocouple and get the digital output using an LED light.
This tutorial shows you how to connect remotely to an HMC4000 device via WiFi and Ethernet using the VNC Viewer Application.
This tutorial shows you how to wire and program a J-Thermocouple using a 0-5V Analog signal conditioner, with an HMI+PLC combo, while displaying on the user-interface.
This tutorial shows you how to program Counter functions in a pump overload scenario & and compressor preventative maintenance, using an HMI+PLC combo while displaying on the user-interface.
This tutorial shows you how to turn the digital output on and off for a 24V DC Motor with an HMI+PLC combo, using Pulse Width Modulation, while displaying on the user-interface.
This tutorial shows you how to program Email with Alarms using an HMI+PLC combo, while displaying on the user-interface.
This tutorial shows you how to use Alarms with an HMI+PLC combo while displaying on the user-interface.
This tutorial shows you how to use Pulse Width Modulation and turning the Digital Output On & Off using an LED Light with an HMI+PLC combo, while displaying on the user-interface.