Converting a HMI5070P/HMI5070Pv2 to cMT3072XHT

Tags: cMTSoftwareUpgrade

Converting a HMI5070P/HMI5070Pv2 to cMT3072XHT

Converting from your HMI5070P/HMI5070Pv2 is quick and easy, giving you several key hardware upgrades along with some software changes.

style=”width: 655.953px; height: 204.11px;” data-filename=”5070pv3072xht.png”>

Software:

Below is a quick video showing you the easy process of converting your current HMI5070P/HMI5070Pv2 project to one that can be used in the cMT3072XHT. This process will need to be completed using EBPro version 6.07.02.375 or later.

<iframe width=”560″ height=”315″ src=”https://www.youtube.com/embed/IpXN0BV-Ulk” title=”YouTube video player” frameborder=”0″ allow=”accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture” allowfullscreen></iframe>

There are some differences in how your new cMT project will be programmed compared to the old HMI model project.

  • The higher resolution of your new cMT3072XHT comes with a different aspect ratio. Any images in your project will be scaled accordingly, however, if they do not look high quality you will need to reimport them into your project.
  • Layered objects are not supported
  • General mode security is disabled
  • System keypads are built-in
  • Some objects have new, or different, settings

For a more in depth look at the differences between our Basic/Advanced HMI’s and our cMT series models please visit the other help topic in the link below.

Converting a Basic/Advanced HMI Project to a cMT Series

Hardware:

Below you will find a table that shows the hardware differences between the HMI5070Pv2 and the cMT3072XHT. All other features will remain the same including resistive touch, CANopen support, and IP66 rating.

style=”width: 693px;” data-filename=”5070pv3072xht.png”>

For more information and pricing, please contact us at sales@maplesystems.com

Content Created by Anthony Morones
Scroll to Top