When using VNC, the remote user will have the same security level as the local operator. These features are discussed in more detail in the Security chapter of the EBPro Programming Manual.
Read More Does a remote user have the same security level as a local operator?
Maple Systems HMIs uses EBPro configuration software. EBPro has a variety of features designed with OEMs in mind – such as the ability to customize the startup screen, to remotely monitor and update the project in the HMI, and to secure the HMI and protect your intellectual property. See the OEM Sample Project for more…
The default password in the HMIs local settings is 6 ones (111111). If the above password does not work, try m1111111 (the letter m, followed by seven ones)
Read More What is the default password in the HMIs local settings?
It may become necessary to reset a Maple Systems HMI to factory default. Tech Note 5115, “Reset Graphic HMI to Default Settings” is split into two sections. Section One describes the procedure for units with DIP switches, and Section Two describes the procedure for units without DIP switches. The default password is (111111). Depending on the age of your unit, the default password on the HMI could be (m1111111)
Security is paramount in today’s technologically advanced times and so is connectivity. Many PLCs take advantage of Ethernet communication to transmit data to a monitoring device such as an HMI. Plant corporate networks also run via Wi-Fi networking. But how do you get data from the Programmable Logic Controller to your corporate network without the…
EasyWatch allows users to monitor HMI and PLC address values via Ethernet from their PC, as well as invoke Macros for debugging, remote monitoring, and control. For example, after creating a Numeric Input Object in EBPro, you can set its address to LW-10, and then monitor the same address in EasyWatch. The value of LW-10…
MAPware-7000 provides multiple security options depending on the HMI + PLC (HMC) series that include custom Access Levels, Protecting Project Screens, and Password Protections. The Access Level feature available on the HMC2000 and HMC4000 Series allows you to create users and passwords assigned to different access levels. These levels can then be assigned to screens…
Security is paramount in today’s technologically advanced times and so is connectivity. Many PLCs take advantage of Ethernet communication to transmit data to a monitoring device such as an HMI. Plant corporate networks also run via Ethernet. But how do you get data from the PLC to your corporate network without the bandwidth or security…
There are two methods of user security in Maple Systems our HMI configuration software: General and Enhanced Mode. General mode is for the majority of uses, where a simple user number and numeric password will suffice. This mode is not available in all models. Enhanced security is for adding users dynamically to the HMI, adding…
Read More What is the difference between general and enhanced security in EBPro?
Security settings in EBPro allow you to disable or password protect project uploads from the HMI, disable or password protect de-compilation of the project file, and password protect the project file itself. These features are discussed in more detail in the Security chapter of the EBPro Programming Manual.
There are three ways to control the display of the System Setting toolbar on the Maple Systems HMI or cMT. (1) There is a check-box setting in the configuration software System Parameters, (2) a local system tag [LB-9020] that can be added to a project, and (3) there is an external dip switch [DIP Switch…