In EBPro, click on the File menu and select Preferences. On the Project tab, check the “Generate backup of project file before save” option. This will create a backup of your project any time you save it with a *.bak1 extension. Subsequent saves will rename the backup file with a *.bak2 and finally *.bak3 extension,…
Yes, you can display Logged Data in an Standard XY Trend Display or Circular Trend Display. Logged files can be displayed on a Trend Display in the same way that an electromechanical chart recorder was used to record data on a paper graph. There are two types of Trend Displays: Standard XY Trend Display, where…
Read More Can I display Data in a Standard or Circular Trend Display?
EZwarePlus and Ezware-5000 are Maple Systems’ legacy configuration software programs that many of our older and legacy Graphic HMIs used. Our newest software, EBPro is backward compatible in many cases. Refer to our Tech Notes for upgrade and conversion information.
The Data Monitor feature is used to display data values in a Maple Systems HMI + PLC or PLC’s internal memory while the application is running. The entire internal memory of the PLC is accessible using the Data Monitor feature, but the user determines which areas of memory to monitor. The Data Monitor feature is…
Also known as Disk Striping, RAID 0 offers the benefit of increased performance. Data is “striped” across multiple disks that work in concert to appear as a single partition. Data throughput is greatly improved; however, this level of RAID offers no redundancy. If one disk fails, it breaks the entire array and results in data…
No, we do not accept credit cards with billing addresses outside of the U.S. We do accept prepayment via Wire Transfer, ACH Bank Transfer, or a credit card with a U.S. billing address.
The network architecture, hardware and software, that allows communication and analysis of vast stores of data across globally distributed assets.
To calibrate Maple Systems HMIs with four DIP switches on the back: Turn DIP switch 1 to the ON position and cycle power on the HMI. This will cause it to boot into calibration mode. Don’t forget to turn the DIP switch back OFF when completed. Other methods of Calibration: Locate the DIP switches behind…
You can use the Data Transfer object in EBPro to move data from a block of registers in one area of memory and write the data to a block of registers in another area of memory in the Maple Systems HMI. This can also be accomplished with a macro using the GetData() and SetData() instructions.
Read More How do I move data from one area of memory to another?
Data Sampling / aka Data Logging is the act of logging data from a device. The logged data is often shown in a Trend display. Trending is the act of taking data and showing it visually, usually via a graph. The relationship between Data Sampling and Trending is intertwined. A Data Sampling Object in EBPro…
Read More What is Data Sampling / Logging? How is the Data Sampling Object used?
Yes, the HMC2000, HMC3000, and the HMC4000 series of HMI+PLCs have built-in web servers, accessible from any Internet web browser, allowing remote access to HMC data from a remote computer on the Ethernet network or, if exposed to the Internet, from anywhere in the world. A username and password are required, ensuring security. The screen…
A “Heavy” Industrial Panel PC is part of Maple Systems’ Industrial Panel PC series. These robust models exemplify cutting-edge touchscreen technology with high-quality components, impressive connectivity, fast processors, and clear, high-contrast TFT displays. Our Fanless Industrial Touchscreen Panel PCs are durable computers designed to operate in most industrial environments. Constructed with rugged aluminum bezel and…