With the Maple Systems cMT Series, LW/LB are local registers whereas PLW/PLB are client registers. PLW and PLB memory is local memory to each client that is being served by a cMT device and is inaccessible from anywhere other than locally on that client device. If you remote access to a cMT device through cMT…
Implementing EasyAccess 2.0 is easy. For complete instructions, refer to the EasyAccess 2.0 Manual available in our Support Center. Step 1: Create Domain Account: An HMI must belong to a domain in order to use EasyAccess 2.0. Anyone can create a new domain for free, all you need is a valid e-mail address. The Domain…
No. The cMT-iV6 is now discontinued. It required hardwired power and Ethernet connections. It did feature a touchscreen, but it is not a portable system. It also did not have an open operating system and will not run applications other than cMT Viewer. The cMT-iV6 was a 9.7″ display specifically designed for use with the…
Security is paramount in today’s technologically advanced times and so is connectivity. Many PLCs take advantage of Ethernet communication to transmit data to a monitoring device such as an HMI. Plant corporate networks also run via Wi-Fi networking. But how do you get data from the PLC to your corporate network without the bandwidth or…
HDMI® (High-Definition Multimedia Interface) is a proprietary audio/video interface for transmitting uncompressed video data and compressed or uncompressed digital audio data from an HDMI® compliant source device, such as a display controller, to a compatible computer monitor, video projector, digital television, or digital audio device.
cMT Viewer is a client application that enables users to view and control Maple Systems cMT devices, quickly and easily. cMT Viewer runs the HMI project on the client device. Only application data is exchanged between the cMT hardware, acting as a server, and the client device – your smart phone or tablet. Monitor and…
Maple Systems Advanced HMI and cMT series both support EasyAccess 2.0, it simply needs to be activated. There are two ways to activate your device depending on the model. Some models require the purchase of a separate activation card and other models come with EasyAccess 2.0 pre-installed. EasyAccess 2.0 activation cards are purchased through Maple…
No. The cMT-iV6 is now discontinued. It required hardwired power and Ethernet connections. It did feature a touchscreen, but it is not a portable system. It also did not have an open operating system and will not run applications other than cMT Viewer. The cMT-iV6 was a 9.7″ display specifically designed for use with the…
There are several layers of security protection available when configuring the cMT HMI. Note: A System Level password is required to log into the cMT device. You can configure separate passwords for uploading, downloading, and decompiling a project file. You can also create user accounts in your EBPro project to limit access to specific screens…
A device for communication between a human operator and a machine. In modern control systems this is typically some type of touchscreen graphical interface.
A single Maple Systems cMT unit can be controlled by up to ten client devices, running any of these platforms, at one time. Conversely, the same client device can be used to connect to any number of cMT servers. The cMT Viewer application in the client device will maintain a history of all cMT servers…
Maple Systems and EasyAccess 2.0 can help your business by: Saving Money: EasyAccess 2.0 reduces travel costs including gas, airfare, and overnight hotel accommodations. It reduces the cost of man-hours paid to send personnel onsite for troubleshooting and repair, as well as reduces the number of pricey technical support phone calls. But most of all,…