Can my HMI be used as a Modbus Gateway?

Maple Systems cMT and HMI products can bridge the gap between your SCADA system and field devices.

Using the HMI’s Modbus RTU/TCP Slave protocol, the Modbus Gateway provides a mechanism to connect the Modbus RTU/TCP Slave protocol to storage within the HMI or in a connected device. The SCADA system uses the Modbus TCP Master protocol to query the HMI using the HMI’s own IP address.

The Modbus Gateway can:

1. Allow the SCADA System to access any HMI internal memory.
2. Allow the SCADA System to access any device connected to the HMI.
3. Allow the HMI to act as a Modbus TCP-to-Modbus RTU bridge.

Refer to Tech Note 5099, “Using the Modbus Gateway” and our Modbus Controller Information Sheets for more information.

Software Downloads & Upgrades

• EBPro

Manuals & Guides

• EBPro Programming Manual

Tech Notes

• Multiple HMIs connecting to one PLC
• Target PLC IP Address Updated Using the HMI Screen
• Using the Modbus Gateway

Videos

• Using a Maple Systems HMI as a Modbus Gateway

Sample Projects

• Modbus Gateway Setup (Mastering EBPro)

Controller Information Sheets

• Controller Information Sheets

Communication Cables

• Communication Cables