I/O Module

HMC3-M0808P0401T-V2

This is a Legacy product and is no longer available for purchase. Please review the information on this page and call (425)-745-3229 or email [email protected] if you have further questions.

HMC3-M0808Y0401T-V2 replaces the HMC3-M0808P0401T-V2

Can customers use the M0808Y0401T-V2 module to replace their M0808P0401T-v2 module?

  • Yes, if they were using 2 digital outputs or less on their HMC3-M0808P0401T module. However, the customer would need to convert their application to the Y-type module. The converting process includes exporting and importing logic/screens to a new project and then allocating to the correct module. The process is described in Tech Note #7020 and is only valid for conversion using the same HMC series, if going from HMC4 – HMC2, only exporting and importing logic is possible.
  • No, if they are using more than 2 digital outputs of the P-type module. They would need an additional module that has more digital sourcing outputs.
Share the product:
Similar Models
Compare HMC3-M0808P0401T-V2 with 1 Other Product Find the right fit for your application. Compare key specifications, features and capabilities side by side.
Control Panel Components
Browse Pushbuttons & Switches, 10-20% Off at Volume Indicator lights, momentary and latching pushbuttons, 2 and 3-position selector switches and E-stops. Select from over 250 variations.

There is no direct replacement for this item. See HMC3-M0808Y0401T-V2 as a possible upgrade option.

Can customers use the M0808Y0401T-V2 module to replace their M0808P0401T module?

  • Yes, if they were using 2 digital outputs or less on their M0808P0401T module. However, the customer would need to convert their application to the Y-type module. The converting process includes exporting and importing logic/screens to a new project and then allocating to the correct module. The process is described in Tech Note #7020 and is only valid for conversion using the same HMC series, if going from HMC4 – HMC2, only exporting and importing logic is possible.
  • No, if they are using more than 2 digital outputs of the P-type module. They would need an additional module that has more digital sourcing outputs.

Converting an I/O Expansion Module from a V1 to a V2 (Same Model)

Need help planning the upgrade? Tell us how this product is used in your system and we will work out the right path forward, and what stays the same in your existing project.

Contact Maple Systems
Call: (425) 745-3229

Product comparison — attributes in rows, products in columns.

Filters
HMC3-M0808P0401T-V2

I/O Module

HMC3-M0808P0401T-V2

Price Not Available (N/A)
View Product
HMC3-M0808Y0401T-V2

I/O Module | 8 Bi-Directional Digital Inputs, 8 Digital Outputs, 4 Analog Inputs, 1 Analog Output, Thermo/RTD

HMC3-M0808Y0401T-V2

$295
View Product

Free HMI+PLC Configuration Software

MAPware-7000 is the free configuration software used to program our HMI+PLC combo units using the IEC 61131-3 programming language. One software to program your graphics and system logic, for a complete control solution. No license or software key is needed.

Download MAPware-7000
Learn More About HMI+PLC Software

Can I pair an HMI+PLC (HMC) with a Maple Systems PLC? Absolutely. Maple Systems PLCs can communicate with an HMI + PLC (HMC) either with or without I/O modules attached to it. A potential application would be to have the PLC installed in a remote cabinet, while the HMC is mounted in a convenient location for the operator. With the HMC optional I/O modules, local control switches could be monitored and controlled by the HMC to reduce wiring complexity. Additionally, only one configuration software is required to program both units pieces. In IEC mode, Modbus is used to communicate between the PLC and HMC.

HMI+PLC Software Downloads & Upgrades

PLC Software Downloads & Upgrades

Manuals & Guides

Videos

Controller Information Sheets

Communication Cables